SCHNEIDER ATV212HU55N4 Frequency converter NEW AND ORIGINAL

SCHNEIDER ATV212HU40N4 Frequency converter good price high QUALITY

SCHNEIDER ATV212HU22N4 Frequency converter one year warranty

SCHNEIDER ATV212HU15N4 Frequency converter New in stock

Complementary [Us] Rated Supply Voltage 250...700 V Continuous Stall Current 3 A Continuous Stall Torque 19.47 lbf.in (2.2 N.m) Peak Stall Torque 77.00 lbf.in (8.7 N.m) Nominal Output Power 720 W Nominal Torque 10.18 lbf.in (1.15 N.m) Nominal Speed 6000 rpm Maximum Current Irms 12 A Line Rated Current 1.5 A

Range Of Product Phaseo AS-Interface Product Or Component Type Power supply Power Supply Type Regulated switch mode Output Voltage 30 V DC AS-Interface line Kw Rating 72 W Input Voltage 100...240 V AC phase to phase L1-L2 100...240 V AC single phase N-L1 Power Supply Output Current 2.4 A Operating Position Vertical Complementary Input Voltage Limits 85...264 V Network Frequency Limits 47…63 Hz Input Voltage Tolerance - 15...10 % Inrush Current 30 A Cos Phi 0.65 Efficiency 83 % 30 V Power Dissipation In W 14.7 W 30 V Current Consumption 0.5 A Input Protection Type Integrated fuse (not interchangeable) Line And Load Regulation 3 % Residual Ripple 300 mV Holding Time >= 10 ms Output Protection Type Against overload 1.1 x In Against overvoltage tripping if U > 1.2 x Un Against short-circuits automatic reset Against undervoltage tripping if U < 0.95 x Un

Power unit ATV1200C-5.906.028 Inverter Power module PLC Power unit

M340 serves as a all-in-one CPU Plug-and-work solution Reduced startup time Increased network reliability and maintainability Reduced total cost of ownership Environmental performance of the product

Micrologic 5.0 X control unit, for Masterpact MTZ circuit breakers, fixed, LSI protections

This switch is part of the Modicon Networking range, an offer of industrial network switches. This TCP/IP extended managed switch has 10/100BASE-TX - 16 ports for copper cable. Ethernet services are configured via web server, VLAN, multicast filtering, data stream control, IGMP snooping, SNMP traps and SYSLOG. It is a network switch with a supply voltage of 12V to 48V, a power consumption of 9.4W and maximum number of switches in a ring is 50. It is furnished with 6-way removable connector. The supported transmission medium is twisted shielded pair CAT 5E copper cable. It is an IP20 rated product. Its dimensions are 111mm (width) x 111mm (depth) x 131mm (height). It weighs 0.6kg. It is suitable for all industrial automation segment applications. This switch is part of the Modicon Networking range, an offer of industrial network switches. This TCP/IP extended managed switch has 10/100BASE-TX - 16 ports for copper cable. Ethernet services are configured via web server, VLAN, multicast filtering, data stream control, IGMP snooping, SNMP traps and SYSLOG. It is a network switch with a supply voltage of 12V to 48V, a power consumption of 9.4W and maximum number of switches in a ring is 50. It is furnished with 6-way removable connector. The supported transmission medium is twisted shielded pair CAT 5E copper cable. It is an IP20 rated product.

Triconex 9662-810 Panel Field Termination Option, 4.5 in (11.43 cm) Width (across DIN rail), 5 in (12.7 cm) Length (along DIN rail) and 4.25 in (10.795 cm) Height (out from DIN rail)  --Automatic on-load voltage regulation for single transformers --Automatic on-load voltage regulation for 4 to 8 transformers in parallel operation, based on the minimum loop current principle or the master-slave follower pinciple  --Control of up to 30 switchgears --Interlocking modules for different wiring methods, ready to use --Various reservation processing functions --Synchronization, simultaneous detection and voltage detection --Dual-position universal switch --32-position selector switch

Analog Input Modules Analog Input (AI) Modules includes three independent input channels. Each input channel receives variable voltage signals from each point, converts them to digital values, and transmits the values to the three Main Processor modules on demand. In TMR mode, one value is then selected using a midvalue selection algorithm to ensure correct data for every scan. Sensing of each input point is performed in a manner that prevents a single failure on one channel. Analog Input Modules require a separate external termination panel (ETP) with a cable interface to the Tricon backplane. Each module is mechanically keyed for proper installation in a Tricon chassis. affecting another channel. Each Analog Input Module sustains complete, ongoing diagnostics for each channel. Failure of any diagnostic on any channel activates the Fault indicator for the module, which in turn activates the chassis alarm signal. The module’s Fault indicator merely reports a channelfault, not a module failure—the module can operate properly with as many as two faulty channels.

Analog Input Modules Analog Input (AI) Modules includes three independent input channels. Each input channel receives variable voltage signals from each point, converts them to digital values, and transmits the values to the three Main Processor modules on demand. In TMR mode, one value is then selected using a midvalue selection algorithm to ensure correct data for every scan. Sensing of each input point is performed in a manner that prevents a single failure on one channel. Analog Input Modules require a separate external termination panel (ETP) with a cable interface to the Tricon backplane. Each module is mechanically keyed for proper installation in a Tricon chassis. affecting another channel. Each Analog Input Module sustains complete, ongoing diagnostics for each channel. Failure of any diagnostic on any channel activates the Fault indicator for the module, which in turn activates the chassis alarm signal. The module’s Fault indicator merely reports a channelfault, not a module failure—the module can operate properly with as many as two faulty channels.

LV525342 circuit breaker EasyPact CVS250F, 36 kA at 415 VAC, 200 A rating thermal magnetic TM-D trip unit, 4P 3d EasyPact CVS250F is a 4 poles 3d fixed circuit breaker with a high level of performance and cost-saving functionality. It is an optimal choice for small and medium-sized buildings protection applications. The breaking capacity (Icu) is 36kA rms at 415VAC 50/60Hz. The operational voltage is 440VAC 50/60Hz. This product embeds a 200A rating thermal-magnetic trip unit (TMD). TMD trip unit provides an adjustable thermal overload protection and a fixed magnetic protection. This 4 poles version (140mm x 161mm x 86mm) comes with a variety of optional functions and accessories. EasyPact CVS250F is compliant with international standards (IEC 60947, CCC, EAC). It can be installed in class II insulation switchboards as it is a class II front face device (IEC 60664-1).

This extended I/O card enables your drive to meet the needs of more complex or extensive applications. It comprises four logic inputs, two analog inputs, one input for PTC probe and one frequency control input. It also comprises three logic outputs and two analog outputs. It is compatible with Altivar 61 and Altivar 71.