Invensys 2212-119 load module

Triconex 9662-810 Panel Field Termination Option, 4.5 in (11.43 cm) Width (across DIN rail), 5 in (12.7 cm) Length (along DIN rail) and 4.25 in (10.795 cm) Height (out from DIN rail)  --Automatic on-load voltage regulation for single transformers --Automatic on-load voltage regulation for 4 to 8 transformers in parallel operation, based on the minimum loop current principle or the master-slave follower pinciple  --Control of up to 30 switchgears --Interlocking modules for different wiring methods, ready to use --Various reservation processing functions --Synchronization, simultaneous detection and voltage detection --Dual-position universal switch --32-position selector switch

Analog Input Modules Analog Input (AI) Modules includes three independent input channels. Each input channel receives variable voltage signals from each point, converts them to digital values, and transmits the values to the three Main Processor modules on demand. In TMR mode, one value is then selected using a midvalue selection algorithm to ensure correct data for every scan. Sensing of each input point is performed in a manner that prevents a single failure on one channel. Analog Input Modules require a separate external termination panel (ETP) with a cable interface to the Tricon backplane. Each module is mechanically keyed for proper installation in a Tricon chassis. affecting another channel. Each Analog Input Module sustains complete, ongoing diagnostics for each channel. Failure of any diagnostic on any channel activates the Fault indicator for the module, which in turn activates the chassis alarm signal. The module’s Fault indicator merely reports a channelfault, not a module failure—the module can operate properly with as many as two faulty channels.

Analog Input Modules Analog Input (AI) Modules includes three independent input channels. Each input channel receives variable voltage signals from each point, converts them to digital values, and transmits the values to the three Main Processor modules on demand. In TMR mode, one value is then selected using a midvalue selection algorithm to ensure correct data for every scan. Sensing of each input point is performed in a manner that prevents a single failure on one channel. Analog Input Modules require a separate external termination panel (ETP) with a cable interface to the Tricon backplane. Each module is mechanically keyed for proper installation in a Tricon chassis. affecting another channel. Each Analog Input Module sustains complete, ongoing diagnostics for each channel. Failure of any diagnostic on any channel activates the Fault indicator for the module, which in turn activates the chassis alarm signal. The module’s Fault indicator merely reports a channelfault, not a module failure—the module can operate properly with as many as two faulty channels.

Invensys MP-381-0-0-2 input module Check Prices & Stock Instantly

Invensys GCM-86120 input module Check Prices & Stock Instantly

Invensys GCM-ECH-001 input module Check Prices & Stock Instantly

Invensys MP-471-600-0-2 basic module Ships Today

Invensys IDP10-T22A11F-M1L13W basic module Ships Today