Triconex 9761-210 Panel Field Termination Option, 4.5 in (11.43 cm) Width (across DIN rail), 5 in (12.7 cm) Length (along DIN rail) and 4.25 in (10.795 cm) Height (out from DIN rail) Simple Type: Termination Panel

Introduce for Triconex Tricon's control system: The main features of Tricon's control system Tricon is a programmable and process control technology with high fault tolerance. Its characteristics are as follows: A. Triple modular redundancy structure (TMR) is provided, with three identical sub-circuits each performing an independent degree of control. There is also a dedicated hardware/software architecture for "voting" on input and output. Ability to tolerate harsh industrial environment. C. It can be installed on site and can be installed and repaired at the module level online on site without disturbing the field wiring. D. Supports up to 118 I/O modules (analog and digital) and optional communication modules. Communication modules can Connect to Modbus hosts and dependents, or to Foxboro and Honeywell Distributed Control System (DCS), other Tricons in a peer-to-peer network, and external hosts on a TCP/IP network. E. Can support remote I/O modules located up to 12 km away from the mainframe. F. Develop and debug the control program by using the programming software based on Windows NT system. G. Intelligent functions in input and output modules to reduce workload on the main processor. Each I/O module has three microprocessors. The input module's microprocessor filters and repairs the input and diagnoses hardware failures on the module. The output module microprocessor provides information for the voting of the output data, checks the validity of the output state through the feedback loop voltage at the output end, and can diagnose the field line problems. H. Provide comprehensive online diagnosis with repair capability. I. Routine maintenance can be performed while Tricon is up and running without interrupting the control process. J. Provide "hot standby" support for I/O modules, which can be used in certain critical situations where services cannot be provided in a timely manner.

SITOP PSU6200 24 V/20 A stabilized power supply input: 120 - 230 V AC (110 - 240 V DC) output: 24 V DC/20 A with diagnostic interface

Main Range of Product Modicon Quantum automation platform Product or Component Type Rack backplane Product Specific Application For distributed I/O modules For remote I/O modules For local I/O modules Complementary Free slots 6 Mounting Support Mounting plate Fixing Mode By screw Net Weight 1.41 lb(US) (0.64 kg) Ordering and shipping details Category US1PC2118155 Discount Schedule PC21 GTIN 3595861127357 Returnability Yes Country of origin FR Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 1.81 in (4.6 cm) Package 1 Width 11.65 in (29.6 cm) Package 1 Length 14.88 in (37.8 cm) Package 1 Weight 2.80 lb(US) (1.27 kg)

ABB DCS800-S02-0520-05, DC Drive, rated 125/300HP, 230VAC/460VAC (Input), 240VDC/500VDC (Output), 4 Quadrants, Reversing

Woodward 8441-1128 A Monitoring Unit 24V Dc Measuring Point Measuring Value Monitoring Unit Part No: 8441-1128 Rev: A Tug4 Tug408B U Aux: 24V Dc I Aux, Max: 1A Dc U Cont, Relays: 250V Ac U Cont Dig. Input: 18-250V 8 Analog Input Pt100 Germany Weight: 580 Gm

Bosch Rexroth AB32-12/01-K-054-22 Heat exchanger Condition :Brand New Warranty :12 months 

Allen-Bradley 80026-524-01-R Power Supply, In: 100-240VAC, Out: 56VDC 26.8A 1500W

Control Mode Open-loop vector or V/Hz induction motor control Open-loop Rotor Flux Control for induction motors (RFC-A) Open-loop permanent magnet motor control (RFC-S) Closed-loop Rotor Flux Control for induction motors (RFC-A) Closed-loop permanent magnet motor control (RFC-S) Active Front End (AFE) power quality convertor

Schneider VZ3TM2200M4371 Motors, Actuators, Solenoids and Drivers Accessories

This extended I/O card enables your drive to meet the needs of more complex or extensive applications. It comprises four logic inputs, two analog inputs, one input for PTC probe and one frequency control input. It also comprises three logic outputs and two analog outputs. It is compatible with Altivar 61 and Altivar 71.

LV525342 circuit breaker EasyPact CVS250F, 36 kA at 415 VAC, 200 A rating thermal magnetic TM-D trip unit, 4P 3d EasyPact CVS250F is a 4 poles 3d fixed circuit breaker with a high level of performance and cost-saving functionality. It is an optimal choice for small and medium-sized buildings protection applications. The breaking capacity (Icu) is 36kA rms at 415VAC 50/60Hz. The operational voltage is 440VAC 50/60Hz. This product embeds a 200A rating thermal-magnetic trip unit (TMD). TMD trip unit provides an adjustable thermal overload protection and a fixed magnetic protection. This 4 poles version (140mm x 161mm x 86mm) comes with a variety of optional functions and accessories. EasyPact CVS250F is compliant with international standards (IEC 60947, CCC, EAC). It can be installed in class II insulation switchboards as it is a class II front face device (IEC 60664-1).

E300 Overload Relays (193/592 IEC/NEMA), Current/Ground Fault Sensing Module (10...100 A) Mounts to 100-C60...C97 contactor

3BHE039905R0101 LTC745A101 Voltage Drive Crowbar Circuit Board The LTC745A101 is a low noise, high speed comparator that is particularly suitable for high speed and high recision applications. The comparator has extremely low noise density and excellent common mode rejection ratio(CMRR), and is capable of opreating at speeds up to 200MHz.