GE 04220FL11232A memory module Inquire Now

GE IC693PBS201 Large module Ships Today

GE IC697ACC701 Driver module Ships Today

B&R 8B0C0320HW00.002-1 Power module Inquire Now

B&R 8BVI0110HWD0.000-1 servo controller Ship to Worldwide

ABB 1TGE120071R1000 memory module Inquire Now

The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen. The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.

The Allen-Bradley 1785-ME64 is a PLC 5 Memory Device Module. The 1785-ME64 has a memory size of 64K words. The Maximum I/O Chassis Universal Remote of this module is 32 per I/O Link. The maximum number of analog I/O of this module is 3072. The Backplane Current of this module is 2.5 A at 5V DC. The Allen-Bradley 1785-ME64 can be used as a Backup module. This module comes with a Control Coprocessor Expansion Port. Remember to switch power off before removing or inserting this module. If you remove or install the module with the power switched on, an electrical arc may happen, and this electrical arc can cause injury and excessive wear to the contacts on the module and its mating connector. Worn contacts may create electrical resistance and this may reduce the product’s reliability.  The Allen-Bradley 1785-ME64 is an Electrically Erasable Programmable Read-Only Memory (EEPROM) module. This module is user-modifiable read-only memory (ROM) which can be erased and reprogrammed (written to) repeatedly through applications with a higher-than-normal power supply voltage. The operating temperature of the 1785-ME64 is 0-60 °C (32-140 °F) and the storage temperature is -40-85 °C (-40-185 °F). The relative humidity is 5-95% without condensation. The Allen-Bradley 1785-ME64 has an operating shock of 30 g (3 pulses, 11 ms) and the nonoperating shock is 50 g (3 pulses, 11 ms). 

Compatible with all PLC-5 Controllers Range of Memory Sizes Compact Size EEPROM Used to Back Up Program Files Write Protection Jumper

Siemens 6ES7 291-8GE20-0XA0 SIMATIC S7-200 MC 291 Memory Module for S7-200 CPU 22x (from 6ES721x-xx22-0XB0), 32K x 8 EEPROM, Storage of PLC Program, Data Logging, Recipe Handling