The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen. The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.

Compatible with all PLC-5 Controllers Range of Memory Sizes Compact Size EEPROM Used to Back Up Program Files Write Protection Jumper

The 1785-L30B is an Allen-Bradley controller that belongs to the PLC5 controller family. This controller features 32Kwords user memory, Two (2) DH+/Remote I/O combination ports, configurable for Adapter or Scanner, One (1) serial port which supports RS-232, 423 and RS-422A communication standards. The 1785-L30B supports a large number of I/O devices. It supports up to 1024 I/O devices which may be composed of any combination of Discrete and analog input and output devices. Additionally, it also supports complementary 1024 input and 1024 output devices. Aside from the supports for large number of I/O devices, this controller is capable of implementing Remote I/O architecture as it may be connected to a maximum of 28 Remote I/O racks. For implementing Remote I/O architecture, the integrated communication ports such as DH+ and Remote I/O (RIO) channels may be utilized. Additionally, an Ethernet interface module may be added to implement the same architecture over Ethernet network. The 1785-L30B is installed with a battery that is used by the controller when power is removed from the controller. This battery maintains the user and program data stored within the controller’s user memory. It is assigned with a BATT indicator LED to report the current charge of the battery. For 1785-L530B, the battery can last up to 84 days when powered off at 100% and 150 days if Powered Off at 50% at an operating temperature of 60 Degree Celsius. When the BATT LED energizes, the battery remains operational for 5 days from the first occurrence of the signal. When the battery charge is completely drained, the contents of the user memory is maintained unless power is applied to the controller. It will only be erased when power is removed and battery is drained. The 1785-L30B has two built-in ports such as channel 1A and channel 1B. These ports are capable of being configured as remote I/O scanners, remote I/O adapters and DH+ communication interfaces. Additionally, the 1785-L30B controller is provided with a 25-pin connector Serial port interface. This serial port supports RS232C standard and configurable for system protocols such as ASCII and DF1. full and half-duplex master protocols and half-duplex slave protocol. An 8-pin mini-DIN connector marked as channel 1A is also provided that supports DH+ connection as well. The 1785-L30B has several indicators on the front panel used for easy interaction with the user. These indicators are marked as BATT used to display the status of the battery. The indicator marked PROC indicates controller state. The FORCE indicator is used to indicate if I/O forces are enabled. The COMM indicator is linked with channel 0 for reporting communication activity while Channel 1A and 1B both have dedicated status indicator. The controller has a Three-position key-switch for setting the controller mode. Each position corresponds to one mode of the processors such as Run, PROG and REM. When in RUN mode, the controller executes the program and act...

ALLEN BRADLEY 1785-05B BROADBAND MODEM CH. B

The Allen-Bradley 1785-KE is a Data Highway communication controller interface module. This module comes with One (1) Data Highway Plus and One (1) RS232 ports, used for connecting RS232 devices to the DH+ network. The 1785-KE is capable of operating and changing data in half-duplex and full-duplex configuration. This module supports communication rates of 57600 bits per second for Data Highway Plus (DH+) and switch selectable speed for RS232 such as 110 to 19200 bits per second. Aside from linking intelligent RS232 devices to DH+ plus network, the 1785-KE is intended to replace the 1785-KD and 1785-KC communication controller modules. The 1785-KE supports mounting to a slot of a 1785 chassis. Appropriate cable for connecting the module to the DH+ network is Allen-Bradley 1770-CD while compatible data terminal interface cable for the RS232-C port is the 1770-CG of modem interface module with catalog no. 1770-CP. Since the 1785-KE is inserted into the backplane of a 1785 chassis, it draws current from the backplane. The module’s current draw is 1.2 Amperes at 5VDC. This module is required to be operated in an environment with temperature range of 0-60 Deg. Celsius. For storage, the storage area shall maintain a temperature range of -40 to 85 Degree Celsius while the ambient humidity rating must be kept at 5-95% without condensation. The 1785-KE is capable of exchanging data betweek Allen-Bradley Advisor color graphic system, PLC3 Programmable Logic Controller, PLC2 Programmable Logic Controller, PLC4 Microtrol Programmable Logic Controller. It may also communicate with workstations that support RS232-C communication. It is a communication module that interfaces any RS-232-C intelligent device with the Data Highway Plus (DH+) network. This module is a single slot module that offers a full Duplex or Half Duplex protocol on the Asynchronous link. It connects to RS-232-C devices through the Asynchronous (RS-232-C) 15-pin female EIA D-shell connector port on the module using the Data Terminal Interface Cable (1770-CG) or the modem interface cable (1770-C); it also connects to the Data Highway Plus (DH+) via the 3-screw terminal block using the Data Highway Plus drop-line cable (Belden 9463). In addition, it can communicate with the 1784-T50 Terminal through the 9-pin male EIA D-shell connector port, and has a transfer rate of 57,600 bits per second on the DH+ and Switch selectable rate ranging from 110 to 19200 bits/second on the RS-232-C port. The 1785-KE has 4 switch assemblies (SW1, SW2, SW3, and SW4) which provide communication options. The SW1 switch provides RS-232-C link options, the SW2 sets Node number, the SW3 selects Data Highway Plus and RS-232-C link communication rates, and the SW4 is a reserved switch. This unit is mounted on a single slot of the 1771 I/O rack, and when using a Drop-line configuration, is mounted within 100 feet of the Data Highway Plus Trunk line. When connecting directly to the RS-232-C device, the maximum installation...

The Allen-Bradley 1785-L20B is a Programmable Logic Controller (PLC) module. This product is a PLC controller that belongs to the legacy PLC5 product family. The 1785-L20B features a variety of embedded communication ports such as One (1) DH+ (Fixed), One (1) DH+/Remote I/O (Adapter or Scanner) One (1) serial port, configurable for RS-232 and 423 and RS-422A standards. These communications ports support individual configuration and independently functions from each other, They can be used simultaneously to implement the intended functions such as communication to compatible partner devices for data exchanges, communication with visualization devices and interaction with programming workstation. The 1785-L20B’s embedded memory amounts to 16Kwords. This memory is a volatile memory, maintained by a lithium battery with catalog number 1770-XYC. This controller supports implementation of distributed I/O architecture via the DH+ or Remote I/O protocol. It may also be optionally installed with an Ethernet interface module for implementation of distributed I/O system over Ethernet. Up to Twelve (12) remote I/O chassis may be installed with this controller. The 1785-L20B Controller supports installation of a Electronically Erasable Programmable Read Only Memory (EEPROM) as memory backup device. Memory options include 1785-ME16 with 16Kwords, 1785-ME32 with 32Kwords, 1785-ME64 with 64 Kwords and 1785-ME100 with 100Kwords.

The Allen-Bradley PLC-5-40E is an Ethernet PLC-5 Processor. It has embedded TCP/IP communication, offering high-performance peer-to-peer communication. Its built-in web capabilities provide web diagnostics and module information, web user provided pages, and Domain Name Service (DNS). For communication, it has 1 Ethernet port, 2 DH+ or Remote I/O (Adapter or Scanner) ports, and 1 serial port configurable for RS-232 / RS-423 / RS-422A. The PLC-5-40E uses Ladder-logic and structured-text programming with an advanced instruction set including sequencer, file-handling, diagnostic, immediate I/O, shift register, and program control instructions. It is used in applications with real-time sequential and regulatory control requirements. The PLC-5-40E processor has a maximum user memory of 48K words with a limit of 32K words per data table file. It has up to 2048 total I/O (any number of the I/O can be inputs or outputs) with 2048 complementary inputs and outputs. It has 16 (0 – 17) I/O racks for I/O addressing. It has an I/O scan time per rack of 10ms at 57.6 kb/s, 7ms at 115.2 kb/s, and 3ms at 230.4 kb/s. The PLC-5-40E requires a backplane current of 3.6A at 5V and it has a maximum power dissipation of 19W. It also contains a battery-backed static RAM with an EEPROM program backup option. It is installed in the left-most slot of the 1771 I/O chassis and requires one slot. The PLC-5-40E processor has global status flags and input interrupts. It also has programmable fault response diagnostics which prevents system failure by reacting to the faults. The PLC-5-40E allows for segregation of tasks controlled by multiple main programs. It examines specific information at specific time intervals with the time interrupt routine.

M4M 20 MODBUS is a network analyzer with 2 digital outputs, aux supply 48-240 V AC/DC, Bluetooth and Modbus RTU

The controller supports a variety of communication protocols and interfaces

Speed controller, 5.6 A, 2.2 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 modules, with braking resistance, with fan Speed controller, Description: integrated PTC thermistor monitoring and Thermoclick with safe isolation, Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation, optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed, Connection of supply voltage via adapter cable on round or flexible busbar junction, Diagnostics and reset on device and via AS-Interface, with AUTO - OFF/RESET - HAND key switches, 3 fixed speeds and 1 potentiometer speed, can be switched over from U/f to (vector) speed control, with selector switch REV - OFF - FWD, optional: Faster stop if external 24 V fails, without manual override switch, Fan: with fan, Braking resistance: with braking resistance, Rated operational voltage: Ue= 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2= 400 V AC, 3-phase, Mains voltage (50/60Hz): ULN= 380 (-15%) - 480 (+10%) V, At 150% overload: Ie= 5.6 A, Control voltage external brake (50/60 Hz): 230/277 V AC, Mains voltage (50/60Hz): ULN= 380 (-15%) - 480 (+10%) V, assigned motor rating P Note: at 400 V, 50 Hz, 150 % Overload: P= 2.2 kW, assigned motor rating P Note: at 480 V, 60 Hz, 150 % Overload: P= 3 HP, assigned motor rating P Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, AS-Interface profile cable: S-7.4 for 31 modules, Standards: IEC/EN 61800-5-1, UL 61800-5-1, Guideline 2011/65/EU (RoHS), CE approval, UL approval, Degree of Protection: IP65, NEMA12

This product is part of the PacDrive 3 range, an offer of motion controllers for automating machines/lines. This motion controller offers 4 axis, 8 discrete inputs, 4 for touch probe input conforming to IEC 61131-2 type 1. It is a motion controller with a rated supply voltage of 24VDC, a discrete output current of 500mA and a power consumption of 30W. It is an IP20 rated product. Its dimensions are 44mm (width) x 222mm (depth) x 270mm (height). It weighs 2.2kg. This product is certified by CULus, CSA, CE, EAC. It meets CSA C22.2 No 14, CSA C22.2 No 274, EN/IEC 61131-2, UL 508C standards. Motion controllers for automating machines/lines with 0 - 130 servo or robot axes. PacDrive 3 LMC controllers provide scalable performance for synchronizing up to 130 servo axes at 1msnetwork update rate and for up to 255 virtual axes.

UFC719AE01 3BHB003041R0001 3BHB000272R0001 The Control Unit is responsible for process management. Just like the logistics distribution department of the factory, the control unit is the command and control center of the entire CPU, consisting of the Instruction Register IR(Instruction Register), the instruction Decoder ID(Instruction Decoder) and the Operation controller OC(Operation) Controller) consists of three components, which are extremely important for coordinating the orderly work of the entire computer. The control unit can be part of the CPU or installed outside the CPU. UFC719AE01 3BHB003041R0001 3BHB000272R0001 Controller Unit (CU) is one of the components of the CPU. Its basic function is to access instructions from inside, analyze instructions and execute instructions. A control unit is a control instrument or control component that realizes one or more control laws. For example, multiple transmission control unit and proxy setting control unit. UFC719AE01 3BHB003041R0001 3BHB000272R0001 No matter which type of control unit, the principle is to control each part of the CPU through the control signal sent by the control unit. Control units can be broadly divided into the following two categories. Microprogram type, which reads and sends control signals by microprogram. The microprogram is executed through a simple digital path called a microsequencer (microcomputer). Hardware type control unit. The control signal is sent directly by the digital path. Due to the scale of integrated circuits and the progress of design technology, this kind of control unit has become possible.

The Allen-Bradley 1756-L83EP processor is a ControlLogix processor unit that is based on the EtherNet/IP Communication network. It comes with 32 tasks and it has 1000 programs per task as well as unlimited event triggers. This unit features a digital I/O count of 128,000 I/O at maximum along with an analog I/O count of 4000 I/O at maximum. The module provides the user with a communication speed of 12 Mbps and it has the option of supporting either 100 or 250 Ethernet Nodes. The 1756-L83EP processor has a user memory capacity of 10 MB and 50 Volts of isolation voltage (continuous). It has a thermal dissipation rating of 21.2 BTU per hour with a power dissipation rating of 6.2 Watts. This unit has a current draw of 1.2 Amps at 5.1 Volts as well as a current draw of 5 milliamps at 1.2 Volts DC.    The 1756-L83EP processor also supports other optional communication options including THE EtherNet, ControlNet, EtherNet/IP, and third-party options such as device networks. For the Ethernet communication unit, it is essential that the users consider the connections to the controller along with the input and output module connections. They support direct connection to the EtherNet/IP network without requiring a bridge module. This controller is intended for use with an SD card since these cards have been tested and confirmed to be compatible and usable with the 1756-L83EP processor. They can also withstand extreme industrial temperature levels. The Allen-Bradley 1756-L83EP processor unit features an optional non-volatile storage memory unit and it comes with a 2 GB SD card. It has a non-removable storage for energy.

Temp. controller, PRO, 1/8 DIN (96x48mm),1 x Valve OUT + Pot.,4 AUX,100-240 VAC

ABB GIR5252100R2201 07KT94-S-H3 Check price and stock now