The TEPI1 interface is part of the utlity grade universal multiplexer FOX615 which provides specificsolutions for power utility applications. TEPI1 has beelspecifically designed for distance protectionapplications. Therefore it provides exactly the featuresrequired by the application and fulfils the relevantteleprotection product standards such as IEC 60834-1and IEEE 1613 as well as EMC standards EN 61000-6-3 and EN 61000-6-2. The highly integrated FOX615solution with TEPI1 for distance protection applicationprovides many benefits for power utilities such as fastalarming in case of problems, full remote configuratiorand control possibilities using the networkmanagement system and higher availability due to lessindividual boxes and redundant channel routing.

The controller supports a variety of communication protocols and interfaces

The Allen-Bradley 2711P-T7C4D8 is a PanelView Plus 6 Graphic operator terminal. This operator terminal is a visualization component that is used to provide a graphical interface intended for machines and processes. This operator terminal enables an intuitive monitoring and control interface via the assembly of logic and display modules which contain the core components of this Human Machine Interface (HMI) device. The 2711P-T7C4D8 provides a colored graphic display via the 6.5-inch screen with viewing area of 132 x 99 mm (5.2 x 3.9 in.) and pixel resolution of 640 x 480 in 18-bit color graphics. Users are able to see a color-coded graphic display that is commonly used to depict a material flowing inside a pipe or stored in a vessel, area marker for typical production lines as well as status of instruments and devices. Operator interacts to the process via the analog-resistive touchscreen input interface that is designed to be operated up to 1 million actuations with an actuation force of 10-110 g. This operator terminal has 512MB Random Access Memory (RAM), used by the operator terminal during runtime environment only. This ensures fast transition from HMI screen to another as well as smooth interaction with runtime objects. The 512MB Flash memory is used by the operator terminal for storing HMI applications as well as system files such as trends, logs, recipes, manuals and other related files. The module has its own embedded Ethernet interface with configurable IP address. It has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The 2711P-T7C4D8 processor’s speed increased from 350 MHz to 1 GHz and the screen transition rate is approximately 70% faster. The system memory increased from 64MB of RAM to 512MB of RAM and flash storage space increased from 64MB to 512MB. The illumination of backlight displays has also increased. Additionally, the 2711P-T7C4D8 providess greater connectivity to a variety of external hardware such as printers, mice, and keyboards. Optional communication modules can be ordered for additional network communication.

The Allen-Bradley 22A-D2P3N104 is a PowerFlex 4 Variable Frequency Drive (VFD). This VFD is powered with an input voltage range of 342-528 VAC, 3-phase with applicable motor output of 2.3 A and Power of 0.75kW (1.0 HP).

IS200WROBH1A is a Power Distribution Board under the Mark VI series. GE created the board as part of their Speedtronic range. The Mark control platform offers scalable redundancy levels. A single (simple) controller with simplex I/O and a single network is the foundation of the system. The dual system has two controllers, singular or fanned TMR I/O, and dual networks, which increases reliability and allows for online repairs. Three controllers, singular or fanned TMR I/O, three networks, and state voting amongst controllers make up the TMR system, which allows for maximum fault detection and availability. The core distribution system and branch circuit elements are two distinct types in the PDM. They are responsible for a cabinet's or a set of cabinets' primary power management. The branch circuit elements take the core output and distribute it to specific circuits in the cabinets for consumption. Branch circuits have their own feedback methods that are not included in the PPDA I/O pack's feedback. IS200WROBH1A is a Relay Fuse And Power Sensing card from WROB. The card has twelve fuses on it. The fuse has a 3.15 A rating and is rated for 500VAC/400VDC. World of Controls has the most comprehensive selection of GE Speedtronic Mark VI control replacement components. At any time, our experts are accessible to help you with your mark IV requirements. If you want any additional information, please contact WOC.

Product Series: E300/E200 Component Type Motor Control and Drives: Sensing Module Mounting (Multiple) : Contactor Mount Details, Contactor: 100-C30...55 Motor FLC, Max: 60 A, max Motor FLC, Min: 6 A, min IP Rating: IP20

MicroFlex e190 is a compact servo drive with flexible Ethernet communication protocol options. It can operate with one of the selectable built-in Ethernet protocols. A free Mint programming license is provided for the drive to realize easy positioning tasks. The drive supports various feedback types, allowing for flexible motor pairing options.

Customs Tariff Number:8543709960 Frame Size: Spare_Parts Gross Weight: 0.2 lb

Siemens Drive T400 Technology Module 6dd1606-0ad0 SIMADYN D MIXED INPUT/OUTPUT MODULE EM11T GENERATOR/TURBINE CONTROL

Micrologic 5.0 X control unit, for Masterpact MTZ circuit breakers, fixed, LSI protections

Spare encoder kit for synchronous motor 1FT/1FK, for shaft height 63. IC22DQ-88 DRIVE-CLiQ. electronic rating plate individually programmable. same as encoder with MLFB extension 1. in spare part scenario delivery without motor data.

M340 serves as a all-in-one CPU Plug-and-work solution Reduced startup time Increased network reliability and maintainability Reduced total cost of ownership Environmental performance of the product

Fanuc IC200CBL002A Configuration Cable

Power unit ATV1200C-5.906.028 Inverter Power module PLC Power unit

The Emerson Nidco servo motor 142U3A200CACAA165240 allows you to control speed with very accurate position accuracy and convert voltage signals into torque and speed to drive control objects. Servo motor rotor speed is controlled by the input signal, and can react quickly, in the automatic control system, used as an executive component, and has the characteristics of small electromechanical time constant, high linearity, starting voltage, etc., can convert the received electrical signal into the angular displacement or angular speed output on the motor shaft.